Security, automation, electrical & IT · Betoda, Ponda, Goa
+91 90750 16328 · Mon–Sat 9:30–18:30

Home › Systems › CCTV & Surveillance

Systems

CCTV & Surveillance

Access, surveillance, alerting and physical security, specified against the property.

Answer

What this system does

A CCTV system is designed backwards from what each camera must achieve. Detecting movement, recognising a face and reading a number plate are three different requirements at the same distance, and they lead to different cameras and different positions.

Cameras capture the areas you need covered, a recorder stores the footage for an agreed period, and viewing is arranged locally or remotely. The recorder, the storage and the network all follow from how many cameras there are and what they record.

A frequent issue with CCTV is a system that shows something happened without showing who did it — because the viewing objective was never stated.

Applications

Typical applications

  • Perimeter and entrance coverage
  • Parking and approach areas
  • Shop floors, offices and reception
  • Warehouse, yard and loading areas
  • Common areas in apartment buildings
  • Factory floors, plant areas and process buildings
  • Multi-building and multi-gate industrial sites
  • Extending or replacing an existing system

Property types: House · Villa · Apartment building · Shop or office · Factory or warehouse · Industrial estate or plant · Hotel or resort

Options

System options

DetectRecogniseIdentify or read a plate
What you getSomething movedYou can tell who it is if you know themA face or plate readable to a stranger
DistanceLongestModerateShortest
Camera positionsFewer, widerMore, closerDedicated, tightly framed
Typical usePerimeter, open groundEntrances, corridorsGate, till point, entry door
Cost effectLowestModerateHighest per position

Larger systems

Industrial sites and systems beyond 16 cameras

Above roughly sixteen cameras a system stops being a bigger version of a small one. The recorder, the storage, the network and the way it is viewed all change together, and each of them is confirmed against the site at survey rather than assumed from the camera count.

Recording architecture

Beyond a single recorder’s channel capacity a system may use a higher-channel recorder, several recorders, or server-based management software. Which suits the site is confirmed at survey.

Storage and retention

Storage follows camera count, resolution, frame rate, compression and the retention period required. A retention figure is only meaningful once those are fixed, so it is stated on the quotation rather than before it.

Network and power

Camera count drives switch capacity, PoE budget and bandwidth. On larger sites the network design is part of the CCTV design, not separate from it.

Multi-building and yard sites

Factories, warehouses and yards often need cabling across buildings, external routes or fibre. Distances and routes are established on site.

Viewing and management

Above a certain scale, viewing moves from a single monitor to a control position or software-managed layout. How many people need access, and from where, is confirmed at survey.

Environment

Dust, washdown, vibration, temperature and outdoor exposure affect enclosure and mounting selection. Any rating required is confirmed against the site conditions and the manufacturer’s specification.

Hazardous and process applications. Explosion-protected or hazardous-area cameras, and camera-based process or machine-vision inspection, are specialist categories. Suitability, certification and availability are confirmed before any quotation is issued.

Site

What the site decides

Measurements

  • Approximate distance from each camera to what it watches, with the unit
  • Mounting height available at each position
  • Whether the position is indoor or outdoor
  • Existing lighting at each position
  • Cable route distance from each position to the recorder
  • Where the recorder can live

Power

Cameras need power at each position, or power over the network cable where the system supports it. The recorder needs a stable supply, and a UPS is worth considering — a recorder that loses power during an incident records nothing.

Network

IP systems need network to each camera position. Where remote viewing is wanted, the site needs a usable internet connection. Whether the existing network reaches each position is a survey question.

Backup

UPS on the recorder and network equipment keeps recording through short outages. Battery-backed cameras are a separate matter and depend on the equipment.

Controls

Local viewing at a monitor, remote viewing on a phone or computer, or both. Remote viewing depends on the internet connection and on how the system is configured.

Compatibility

Extending an existing system depends on what is installed — the recorder type, the channel count available, and whether the existing cabling suits the cameras being added. The recorder make and model is the useful starting point.

Safety

Safety considerations

Camera placement and recording may be subject to privacy, employment, building or society and other applicable requirements depending on the property and use. The customer should confirm the requirements relevant to their situation.

In practice that usually means considering what falls outside your own property, and whether signage or notification applies where people are recorded at work or in a public-facing business. This website is not a substitute for advice on the requirements that apply to you.

Existing systems

Replacing or extending

For an existing system, photograph the recorder including its make and model, the number of channels in use, and one or two cameras. That establishes what can be extended and what would need replacing.

Expansion: Plan channel count with expansion in mind. A recorder filled to capacity on day one means replacing it rather than adding to it, which is usually the more expensive route.

Prepare

What to photograph

  • Each area you want covered, taken from roughly where the camera would go
  • The proposed mounting position at each point
  • The existing recorder, with its make and model plate
  • Where the recorder is or would be located
  • The route cables would take
  • The area at night, if night viewing matters
When a survey is needed: Where cable routes are unclear, where the network does not obviously reach, where an existing system is being extended, or where any position needs to read plates or recognise faces at distance.

What may be enough initially: For a small domestic system with clear mounting positions and short cable runs, photographs plus the camera positions and distances are often enough for preliminary guidance.

Plan it

Record your site requirement

The planner records the measurements and site conditions above, and adds them to your requirement.

This records site conditions. It does not select equipment. Motor sizing, camera selection and recorder specification follow real measurements, manufacturer specifications and, where required, a survey.

Cost

What affects the price

  • Number of cameras and their viewing objectives
  • Indoor or outdoor positions
  • Cable runs and how difficult the routes are
  • Recorder and storage capacity
  • Network work needed
  • Power provision at positions
  • UPS where included
  • Mounting height and access equipment needed
We do not publish prices. They depend on the system size, the device count, the site, the cabling and the installation involved, and are confirmed at quotation.

Time

What affects the time

  • System size and device count
  • Site complexity and cable routes
  • Whether a survey is needed first
  • Equipment availability for the specification chosen
  • Power and network work needed beforehand
  • Site access and permitted working hours
  • Approvals where a building or association requires them

What can delay installation

  • Power or network not ready at the positions agreed
  • Access to the site or to working areas
  • A specification change after survey
  • Civil or structural work needed for mounting or cable routes
  • Equipment availability for a specific configuration

Scope

Specification and quotation

What a specification includes

  • The devices and where each one goes
  • Cabling and containment
  • Power and network provision required
  • Controls and how the system is operated
  • Configuration and handover as quoted
  • Anything excluded, stated plainly

What is confirmed at quotation

  • Final device selection against site conditions
  • Cable routes and quantities
  • Any civil or electrical work needed
  • Installation scope and working arrangement
  • Applicable warranty, commissioning, support and after-sales arrangements
  • Price and timing
Photos, measurements and requirement information may support preliminary guidance or an initial quotation where appropriate. A site survey is required where necessary before final system specification, installation scope and final quotation are confirmed.

Process

How it runs

  1. Initial requirement. What the system needs to do, and where.
  2. Photographs and measurements. Recorded with the planners.
  3. Preliminary guidance where appropriate. Indicative only.
  4. Site survey where required. Power, network, mounting positions and cable routes.
  5. Final specification. Equipment selected against real conditions.
  6. Final quotation. Then approval, installation and handover.

Avoid

Common mistakes

  • Not stating what each camera must achieve, then finding the footage unusable
  • Buying a recorder with no spare channels
  • Ignoring lighting at night-viewing positions
  • Assuming the network reaches every position
  • Positioning cameras without considering what falls outside your own property

Questions

Frequently asked

Can you do systems with more than 16 cameras?

Yes. Above a single recorder’s channel capacity the recording architecture, storage, network and viewing arrangement all change, and each is confirmed against the site at survey and stated on the quotation.

What information is needed before planning CCTV?

The areas to cover, what each camera must achieve, the approximate distance to each subject, whether night viewing matters, and whether the network reaches the positions.

Photographs taken from roughly where each camera would go are one of often the useful things you can send.

How much CCTV storage might be required?

It depends on camera count, bitrate, hours recorded per day and how long you keep footage. The storage estimator on the tools page does the arithmetic from figures you supply.

Actual storage varies with resolution, codec, frame rate, motion recording and scene complexity, so the estimate is for planning rather than for ordering a recorder.

Can I view cameras on my phone?

Usually, where the system supports it and the site has a usable internet connection. It is worth stating at specification rather than adding later, because it can affect equipment choice.

Can you add cameras to my existing system?

Often, depending on the recorder, its spare channels and the existing cabling. Send a photograph of the recorder including its model plate and it can be checked.

WhatsApp us