Security, automation, electrical & IT · Betoda, Ponda, Goa
+91 90750 16328 · Mon–Sat 9:30–18:30

Home › Systems › Intercom & Video Door Phone

Systems

Intercom & Video Door Phone

Access, surveillance, alerting and physical security, specified against the property.

Answer

What this system does

An intercom is sized by entry points and indoor stations. How many doors or gates people arrive at, and how many places inside need to answer, determine the system. Existing cabling then determines how much work it takes.

An outdoor station at the entry point calls indoor stations. Video systems show who is there; audio systems do not. Many systems can release a gate or door lock from the indoor station.

On a replacement, the existing cabling is usually the deciding factor between a straightforward swap and a much larger job.

Applications

Typical applications

  • House and villa entrances
  • Apartment building entry
  • Office reception and rear entrances
  • Gate-to-house communication on larger plots
  • Replacing a failed intercom

Property types: House · Villa · Apartment building · Shop or office · Hotel or resort

Options

System options

Audio onlyVideo
Shows the visitorNoYes
CablingGenerally simplerDepends on the system
Typical useInternal communication, simple entryEntry where seeing matters
App accessSometimesCommonly available
CostLowerHigher per station

Site

What the site decides

Measurements

  • Number of entry points
  • Number of indoor stations
  • Number of floors
  • Distance from each entry point to each indoor station
  • Existing cable type and condition, if any

Power

Each station needs power, and the outdoor station usually draws from the system. Where indoor stations are spread across floors, power at each location is a planning question.

Network

Only needed where app access or a networked system is wanted. Many intercoms work without any network at all.

Backup

Worth considering where the intercom also releases the only gate or door. A visitor who cannot be admitted during a power cut is an inconvenience; a resident who cannot get in is more than that.

Controls

Indoor station handsets or panels, and app access where supported. Gate or door release from the indoor station is common and should be stated as a requirement.

Compatibility

Existing cabling is a frequent consideration on an intercom replacement. What is in the wall may not suit a newer system, and whether it can be reused is confirmed at survey rather than assumed.

Safety

Safety considerations

Where the intercom releases the only entry to a property, think about what happens if it fails — a key override or another way in matters.

Outdoor stations are exposed to weather and to tampering, and mounting position affects both.

Existing systems

Replacing or extending

For a replacement, photograph the existing outdoor station, one indoor station, and any visible cabling or junction. The make and model on either station is the useful detail.

Expansion: Additional indoor stations can often be added, within the limits of the system. Those limits are worth knowing at specification.

Prepare

What to photograph

  • The entry point and where the outdoor station is or would go
  • Each indoor station position
  • Any existing outdoor and indoor unit, with model plates
  • Any visible existing cabling or junction box
  • The gate or door lock, if release is required
When a survey is needed: Where existing cabling is being reused, where stations are spread across floors, or where more than one entry point is involved.

What may be enough initially: For a straightforward one-entry, one-station replacement, photographs of both existing units may be enough for preliminary guidance.

Plan it

Record your site requirement

The planner records the measurements and site conditions above, and adds them to your requirement.

This records site conditions. It does not select equipment. Motor sizing, camera selection and recorder specification follow real measurements, manufacturer specifications and, where required, a survey.

Cost

What affects the price

  • Number of entry points
  • Number of indoor stations
  • Audio or video
  • Whether existing cabling can be reused
  • App access requirement
  • Gate or door release integration
  • Cable routes and any civil work
We do not publish prices. They depend on the system size, the device count, the site, the cabling and the installation involved, and are confirmed at quotation.

Time

What affects the time

  • System size and device count
  • Site complexity and cable routes
  • Whether a survey is needed first
  • Equipment availability for the specification chosen
  • Power and network work needed beforehand
  • Site access and permitted working hours
  • Approvals where a building or association requires them

What can delay installation

  • Power or network not ready at the positions agreed
  • Access to the site or to working areas
  • A specification change after survey
  • Civil or structural work needed for mounting or cable routes
  • Equipment availability for a specific configuration

Scope

Specification and quotation

What a specification includes

  • The devices and where each one goes
  • Cabling and containment
  • Power and network provision required
  • Controls and how the system is operated
  • Configuration and handover as quoted
  • Anything excluded, stated plainly

What is confirmed at quotation

  • Final device selection against site conditions
  • Cable routes and quantities
  • Any civil or electrical work needed
  • Installation scope and working arrangement
  • Applicable warranty, commissioning, support and after-sales arrangements
  • Price and timing
Photos, measurements and requirement information may support preliminary guidance or an initial quotation where appropriate. A site survey is required where necessary before final system specification, installation scope and final quotation are confirmed.

Process

How it runs

  1. Initial requirement. What the system needs to do, and where.
  2. Photographs and measurements. Recorded with the planners.
  3. Preliminary guidance where appropriate. Indicative only.
  4. Site survey where required. Power, network, mounting positions and cable routes.
  5. Final specification. Equipment selected against real conditions.
  6. Final quotation. Then approval, installation and handover.

Avoid

Common mistakes

  • Assuming existing cabling will suit a new system
  • Forgetting an indoor station where it will actually be needed
  • Not stating that gate release is required until after specification
  • Mounting the outdoor station where sun or rain makes the screen unusable

Questions

Frequently asked

Video door phone or intercom — what is the difference?

A video door phone shows you the visitor; an audio intercom only lets you speak. Otherwise they do a similar job, and both can usually release a gate or door.

Can I reuse my existing intercom wiring?

Sometimes. It depends on the cable type, its condition, and what the new system requires. This is checked at survey, because it is the difference between a straightforward replacement and running new cable.

Can I answer the door from my phone?

Many systems support it, subject to the equipment and a usable internet connection. State it as a requirement at the start, because it can affect which system suits.

WhatsApp us