Security, automation, electrical & IT · Betoda, Ponda, Goa
+91 90750 16328 · Mon–Sat 9:30–18:30

Home › Systems › Motorised Systems

Systems

Motorised Systems

Access, surveillance, alerting and physical security, specified against the property.

Answer

What this system does

Every motorised system comes down to the same three questions: what moves, how heavy is it, and how often. Add the power available and the control method, and the specification follows.

Covers powered systems outside the main security categories — louvres and pergolas, motorised curtains and blinds, sliding partitions and doors, and other installations where something moves under powered control.

Applications

Typical applications

  • Motorised louvres and pergolas
  • Powered curtains and blinds
  • Sliding partitions and large doors
  • Any opening operated frequently enough to justify automation
  • Replacing a failed motor on an existing installation

Property types: Villa · House · Hotel or resort · Shop or office · Apartment building

Options

System options

What decides it
What movesWeight, size and how it is supported
How oftenOccasional or several times daily - this is duty
PowerWhether a supply exists where the motor goes
ControlRemote, switch, app, or automated by condition
OverrideWhat happens when power fails

Site

What the site decides

Measurements

  • Opening or run width, with the unit
  • Height or drop, with the unit
  • Approximate weight of what moves, if known
  • Space available for the motor and mechanism
  • Distance to the nearest suitable power point

Power

A supply is needed where the motor is fitted. On retrofits into finished buildings this is often the constraint that shapes the whole job.

Network

Only where app control or automation by condition is wanted. Many installations work perfectly with a remote and a wall switch.

Backup

Consider what happens when the power fails, particularly where the system covers an opening that may need to be operated during an outage.

Controls

Remote, wall switch, app, or automation by time or sensor. More control methods means more to configure and hand over.

Compatibility

Where a motor is being replaced, the existing model and the mechanism condition both matter. A mechanism that binds will shorten any motor.

Safety

Safety considerations

Anything that moves under power and could trap a person needs appropriate safety devices and force settings. That applies as much to a large sliding panel as to a gate.

Existing systems

Replacing or extending

Photograph the existing motor and plate, the mechanism, and the control position.

Expansion: Additional controls or automation can usually be added within the limits of the system chosen.

Prepare

What to photograph

  • The whole installation, from a few steps back
  • The mechanism and how it is supported
  • Any existing motor, with its plate
  • The control position
  • The nearest power point
When a survey is needed: Commonly for a retrofit into a finished building, and wherever weight, span or power is uncertain.

What may be enough initially: Photographs plus dimensions and an approximate weight can support preliminary guidance on a straightforward installation.

Plan it

Record your site requirement

The planner records the measurements and site conditions above, and adds them to your requirement.

This records site conditions. It does not select equipment. Motor sizing, camera selection and recorder specification follow real measurements, manufacturer specifications and, where required, a survey.

Cost

What affects the price

  • What is being moved, and its weight
  • Span or drop
  • Duty expected
  • Whether power exists at the position
  • Control methods
  • Safety devices
  • Any structural or civil work needed
We do not publish prices. They depend on the system size, the device count, the site, the cabling and the installation involved, and are confirmed at quotation.

Time

What affects the time

  • System size and device count
  • Site complexity and cable routes
  • Whether a survey is needed first
  • Equipment availability for the specification chosen
  • Power and network work needed beforehand
  • Site access and permitted working hours
  • Approvals where a building or association requires them

What can delay installation

  • Power or network not ready at the positions agreed
  • Access to the site or to working areas
  • A specification change after survey
  • Civil or structural work needed for mounting or cable routes
  • Equipment availability for a specific configuration

Scope

Specification and quotation

What a specification includes

  • The devices and where each one goes
  • Cabling and containment
  • Power and network provision required
  • Controls and how the system is operated
  • Configuration and handover as quoted
  • Anything excluded, stated plainly

What is confirmed at quotation

  • Final device selection against site conditions
  • Cable routes and quantities
  • Any civil or electrical work needed
  • Installation scope and working arrangement
  • Applicable warranty, commissioning, support and after-sales arrangements
  • Price and timing
Photos, measurements and requirement information may support preliminary guidance or an initial quotation where appropriate. A site survey is required where necessary before final system specification, installation scope and final quotation are confirmed.

Process

How it runs

  1. Initial requirement. What the system needs to do, and where.
  2. Photographs and measurements. Recorded with the planners.
  3. Preliminary guidance where appropriate. Indicative only.
  4. Site survey where required. Power, network, mounting positions and cable routes.
  5. Final specification. Equipment selected against real conditions.
  6. Final quotation. Then approval, installation and handover.

Avoid

Common mistakes

  • Selecting a motor before weight and span are known
  • Automating a mechanism that already binds
  • Assuming power is available at the motor position
  • Leaving no accessible override

Questions

Frequently asked

Can any existing system be motorised?

Not automatically. The mechanism has to move freely, the structure has to support the motor, and power has to reach the position. All three are checked at survey.

WhatsApp us