Systems
Shutters & Motorised Openings
Access, surveillance, alerting and physical security, specified against the property.
Answer
What this system does
A motorised shutter opens and closes under powered control. Manual or emergency operation arrangements depend on the selected system, site access, manufacturer specification and applicable safety requirements. Where controlled access to storage is required, tell us what is involved and it will be reviewed against what can be supplied.
Applications
Typical applications
- Shop and showroom frontages
- Garage and parking entrances
- Warehouse and loading openings
- Securing openings that are operated daily
- Replacing a failed shutter motor
Property types: Shop or office · Factory or warehouse · Villa · Apartment building · Hotel or resort
Options
System options
| Manual | Motorised | |
|---|---|---|
| Operation | Physical effort each time | Powered |
| Suits | Occasional use, smaller openings | Daily use, larger or heavier shutters |
| Power needed | None | Yes, at the opening |
| Failure behaviour | Does not depend on electrical power | Needs a manual override |
| Consideration | Effort and wear | Motor duty and override access |
Site
What the site decides
Measurements
- Opening width, with the unit
- Opening height, with the unit
- Shutter weight or material, if known
- Space above the opening for the barrel
- Distance to the nearest suitable power point
Power
Power is needed at the opening. On a shop frontage this is confirmed on diagnosis; on an outbuilding or a new opening it may not be, and it has to be established early.
Network
Rarely required. App control is possible on some systems but is not the norm for shutters.
Backup
Manual or emergency operation matters here. A shutter that cannot be opened during a power failure can trap stock, vehicles or people behind it, so the arrangement should follow the selected system, site access and applicable safety requirements.
Controls
Wall switch, remote, or both. On a shop frontage, a keyed external control is often wanted so the shutter can be opened from outside.
Compatibility
Where a motor is being replaced, the existing make and model determines whether a direct replacement exists. Shutter condition matters as much — a binding shutter can overload powered operation.
Safety
Safety considerations
A powered shutter is heavy and closes under force. Safety devices and correct force settings matter, particularly where the opening is used by the public or by vehicles.
Where a manual or emergency operation arrangement is provided, it should be accessible and whoever uses the shutter should know how it works.
Existing systems
Replacing or extending
For a motor replacement, photograph the existing motor and its plate, the shutter, and the control position. Shutter condition should be assessed at the same time.
Expansion: Additional controls can usually be added. Whether the existing motor supports them depends on the model.
Prepare
What to photograph
- The opening, whole, with something for scale
- The shutter, if fitted
- The space above the opening
- Any existing motor, with its plate
- The control position
- The nearest power point
What may be enough initially: For a standard shop shutter with power present, photographs plus the opening dimensions can support preliminary guidance.
Plan it
Record your site requirement
The planner records the measurements and site conditions above, and adds them to your requirement.
Cost
What affects the price
- Opening size
- Shutter weight and type
- Usage frequency and duty
- Whether power exists at the opening
- Control options
- Safety devices
- Whether an existing motor is removed
- Any civil work
Time
What affects the time
- System size and device count
- Site complexity and cable routes
- Whether a survey is needed first
- Equipment availability for the specification chosen
- Power and network work needed beforehand
- Site access and permitted working hours
- Approvals where a building or association requires them
What can delay installation
- Power or network not ready at the positions agreed
- Access to the site or to working areas
- A specification change after survey
- Civil or structural work needed for mounting or cable routes
- Equipment availability for a specific configuration
Scope
Specification and quotation
What a specification includes
- The devices and where each one goes
- Cabling and containment
- Power and network provision required
- Controls and how the system is operated
- Configuration and handover as quoted
- Anything excluded, stated plainly
What is confirmed at quotation
- Final device selection against site conditions
- Cable routes and quantities
- Any civil or electrical work needed
- Installation scope and working arrangement
- Applicable warranty, commissioning, support and after-sales arrangements
- Price and timing
Process
How it runs
- Initial requirement. What the system needs to do, and where.
- Photographs and measurements. Recorded with the planners.
- Preliminary guidance where appropriate. Indicative only.
- Site survey where required. Power, network, mounting positions and cable routes.
- Final specification. Equipment selected against real conditions.
- Final quotation. Then approval, installation and handover.
Avoid
Common mistakes
- Selecting a motor before the opening size and shutter weight are known
- Automating a shutter that is mechanically binding or poorly balanced
- Not planning the manual override position
- Assuming power is available at the opening
Questions
Frequently asked
Can my existing shutter be motorised?
Often, provided the shutter runs freely and the structure suits it. A mechanically binding or poorly balanced shutter can overload powered operation and may damage components, so its condition is checked at survey.
What happens in a power cut?
That depends on the manual or emergency operation arrangement provided with the selected system. Where one is fitted, its position and operation should be covered at handover.